3D-printed parts
Here's a list of all the parts in the Rover that are 3D-printed and the easiest to modify to your needs.

Material

If you want to reprint some parts and get the same aesthetics, here are the filaments we use internally to manufacture.
Gray - Fiberology Easy PLA Gray - 0.3 layer
Black - Fiberology Easy PLA Black - 0.3 layer
Position the parts as shown in the table below and you'll end up with pretty much the same results.

Print table

Covers

Image
Slicer orientation & support
Name
Link
00098 Front cover
00099 Battery cover
00130 Addon quarter cover

Wheel parts

Image
Slicer orientation & support
Name
Link
00173 Torque plate
00191 Wheel rim
00175 Wheel mount A
00190 Wheel mount B
04003-G Wheel cap

Main Electronics Box

Image
Slicer orientation & support
Name
Link
00185 MEB Box
00188 MEB Cover
00187 Camera mount
00183 Wifi modem adapter

Addons

Image
Slicer orientation & support
Name
Info
00189 Universal mounting plate
01113
PhantomX Pincher
adapter
WidowX 250 adapter
Hokuyo URG-04-LX adapter